Ceyear 2438CA/CB/PA/PB Microwave Power Meter
2438 series microwave power meter consists of microwave power meter host and a series of microwave power sensors. With the new design of broadband diode detector, digital signal processing technology and multidimensional calibration compensation technology are adopted, the instrument own wide frequency band, wide dynamic range, high accuracy, fast measurement and analysis, sensor serialization and so on. It is mainly used for measuring and calibrating the average power, peak power and pulse envelope power of microwave signals. It is an important measurement instrument for R&D, production, acceptance and maintenance in radar, electronic countermeasures, communications and other fields.
2438 Series Microwave Power Meter Datasheet
FUNCTIONS & FEATURES
- Wide frequency range: 9kHz to 500GHz
- Abundant power sensors: CW power sensor frequency up to 500GHz with the max. dynamic range 90dB, Peak power sensor frequency up to 67GHz with the max. dynamic range 60dB
- More than 10 kinds of measurement and analysis functions of amplitude and time domain parameters for microwave / millimeter-wave pulse modulation signals
- CW measurement, peak measurement, CCDF statistic measurement
- Internal calibration technology
- Flexible frequency response offset list settings, with high-power attenuator or high-power directional coupler to achieve accurate measurement of signal power
- GPIB, LAN, USB, programmable control
Multi- measurement mode
When the CW power sensor is connected, it becomes traditional CW power meter. The instrument can accurately measure the output power of micro-wave and millimeter wave with the frequency range of 9 KHz~500 GHz. The dynamic range of output power measurement can up to 90 dB with a single sensor.
When the peak power sensor is connected, it becomes high-performance peak power meter. The amplitude and time domain parameters of pulse modulated signals in 50MHz ~ 67GHz band can be measured and analyzed.
In the statistic measurement mode, the instrument does not need trigger events to measure, but can realize continuous sampling measurement of the signals. CCDF represents the percentage of a sample point in a specific sample that is greater than or equal to a specific value in the sample. It can also be represented as 1 minus CDF.
Frequency response offset for high power measurement
This function is very useful when storing high-power directional coupler or high-power attenuator for high frequency signal measurement. After starting the frequency response offset function, the power meter automatically sets the calibration factor according to the calibration form of the sensor and the frequency response offset form in the process of automatic calibration and power measurement, and corrects the measurement results to ensure the measurement accuracy.
Internal zero, fast calibration
The peak power sensor adopts internal zero calibration technology, which makes the peak power sensor automatic calibration speed very fast. In addition, it can be calibrated without leaving the measured parts, and the signal can be zeroed without interruption of the signal input.
Save and recall configuration information
In order to reduce the duplication process, the user can save up to 10 configuration information of the power meter host. These configuration parameters are stored in the system, and the user can make a convenient call when conducting similar measurements.
Programmable control
GPIB, LAN, USB control, for system construction.
TYPICAL APPLICATIONS
Mainly used for calibrating and measuring the average power, peak power and pulse envelope power of microwave signals
In CW mode, it is a universal microwave power meter. In peak measurement mode, through setting time base, the instrument can automatically measure and analyze more than 10 kinds of microwave / millimeter-wave pulse modulation signal pulse envelope parameters, such as peak power, pulse power, average power, overshoot, rise time, fall time, top amplitude, bottom amplitude, pulse width, pulse period, duty cycle, off-time, pulse repetition frequency, and etc.
Main unit
| Model | 2438PA/PB | 2438CA/CB |
| Channels | Single/Double | Single/Double |
| Frequency range | 9kHz～500GHz | 9kHz～500GHz |
| Pulse power range | -40dBm～+20dBm | —— |
| CW power range | -70dBm～+50dBm | -70dBm～+50dBm |
| Max. display resolution | Log：0.001dB
Line：0.0001 |
Log：0.001dB
Line：0.0001 |
| Relative offset range | ±100.00dB | ±100.00dB |
| Rise time | ≤13ns | —— |
| Video bandwidth | ≥30MHz | —— |
| Maximum pulse repetition rate | 10MHz | —— |
| Minimum pulse width | 50ns | —— |
| Time base range | 2ns/div～3600s/div | —— |
| Internal trigger level range | -20dBm～+20dBm | —— |
| Calibration source frequency | 50MHz±1MHz | 50MHz±1MHz |
| Calibration source power | 1.000mW（1±1.0%） | 1.000mW（1±1.0%） |
| Connector type | Type-N（f） | Type-N（f） |
| Meter uncertainty | ±1.0% | ±1.0% |
| Display | 4.3 inch colorful LCD | 4.3 inch colorful LCD |
| Power requirement | 90～240VAC，50/60Hz，50Watts Max. | 90～240VAC，50/60Hz, 50Watts Max. |
| Dimensions (W×H×D) | 220 mm * 89 mm * 340 mm | 220 mm * 89 mm * 340 mm |
| Weight | ≤5kg | ≤5kg |
| Operating/storage temperature | 0℃～50℃/-40℃～+70℃ | 0℃～50℃/-40℃～+70℃ |
| * Depending on power sensors | ||
CW power sensor
| 71710A
CW Power Sensor |
Frequency range | 9kHz～12GHz | ||||
| Power range | -60dBm～+20dBm | |||||
| Maximum SWR | 100kHz～12GHz | 1.20 | ||||
| Calibration factor uncertainty | 9kHz～12GHz | ±4.0% | ||||
| Connector type | Type-N（m） | |||||
| 71710D
CW Power Sensor |
Frequency range | 10MHz～18GHz | ||||
| Power range | -70dBm～+20dBm | |||||
| Maximum SWR | 10MHz～50MHz
50MHz～2GHz 2GHz～12.4GHz 12.4GHz～18GHz |
1.35
1.15 1.20 1.26 |
||||
| Calibration factor uncertainty | 10MHz～18GHz | ±4.5% | ||||
| Connector type | Type-N（m） | |||||
| 71710E
CW Power Sensor |
Frequency range | 50MHz～26.5GHz | ||||
| Power range | -70dBm～+20dBm | |||||
| Maximum SWR | 50MHz～2GHz
2GHz～12.4GHz 12.4GHz～18GHz 18GHz～26.5GHz |
1.15
1.20 1.26 1.35 |
||||
| Calibration factor uncertainty | 50MHz～18GHz
18GHz～26.5GHz |
±4.5%
±5.9% |
||||
| Connector type | 3.5mm（m） | |||||
| 71710F
CW Power Sensor |
Frequency range | 50MHz～40GHz | ||||
| Power range | -70dBm～+20dBm | |||||
| Maximum SWR | 50MHz～2GHz
2GHz～12.4GHz 12.4GHz～18GHz 18GHz～26.5GHz 26.5GHz～40GHz |
1.15
1.20 1.26 1.35 1.50 |
||||
| Calibration factor uncertainty | 50MHz～18GHz
18GHz～26.5GHz 26.5GHz～40GHz |
±4.5%
±5.9% ±6.9% |
||||
| Connector type | 2.4mm（m） | |||||
| 71710L
CW Power Sensor |
Frequency range | 50MHz～67GHz | ||||
| Power range | -70dBm～+20dBm | |||||
| Maximum SWR | 50MHz～2GHz
2GHz～12.4GHz 12.4GHz～18GHz 18GHz～26.5GHz 26.5GHz～40GHz 40GHz～67GHz |
1.15
1.20 1.26 1.35 1.50 1.78 |
||||
| Calibration factor uncertainty | 50MHz～18GHz
18GHz～26.5GHz 26.5GHz～40GHz 40GHz～67GHz |
±4.5%
±5.9% ±6.9% ±7.9% |
||||
| Connector type | 1.85mm（m） | |||||
| 71716
Millimeter-wave power sensor |
Frequency range | 50GHz～75GHz | ||||
| Power range | -30dBm～+20dBm | |||||
| Maximum SWR | 1.35 | |||||
| Connector type | Standard square wave-guide | |||||
| 71717
Millimeter-wave power sensor |
Frequency range | 75GHz～110GHz | ||||
| Power range | -30dBm～+20dBm | |||||
| Maximum SWR | 1.35 | |||||
| Connector type | Standard square wave-guide | |||||
| 71718
Millimeter-wave power sensor |
Frequency range | 110GHz～170GHz | ||||
| Power range | -30dBm～+20dBm | |||||
| Maximum SWR | 1.45 | |||||
| Connector type | Standard square wave-guide | |||||
| 87106A
Millimeter-wave power sensor |
Frequency range | 170GHz～220GHz | ||||
| Power range | -30dBm～+20dBm | |||||
| Maximum SWR | 1.5 | |||||
| Connector type | Standard square wave-guide | |||||
| 87106B
Millimeter-wave power sensor |
Frequency range | 220GHz～325GHz | ||||
| Power range | -30dBm～+20dBm | |||||
| Maximum SWR | 1.5 | |||||
| Connector type | Standard square wave-guide | |||||
| 87108B Millimeter-wave power sensor | Frequency range | 325GHz-500GHz | ||||
| Power range | -30dBm～+20dBm | |||||
| Maximum SWR | 1.8 | |||||
| Connector type | Standard square wave-guide | |||||
Peak power sensor
| 81702D
Peak power sensor |
Frequency range | 50MHz～18GHz | ||||
| Pulse power range | -20dBm～+20dBm | |||||
| Rise time | ≤10ns（frequency carrier ＞500MHz） | |||||
| Maximum SWR | 50MHz～2GHz
2GHz～18GHz |
1.15
1.26 |
||||
| Calibration factor uncertainty | 50MHz～18GHz | ±5.0% | ||||
| Connector type | Type-N（m） | |||||
| 81702E
Peak power sensor |
Frequency range | 500MHz～26.5GHz | ||||
| Pulse power range | -20dBm～+20dBm | |||||
| Rise time | ≤10ns | |||||
| Maximum SWR | 500MHz～2GHz
2GHz～18GHz 18GHz～26.5GHz |
1.15
1.26 1.35 |
||||
| Calibration factor uncertainty | 500MHz～18GHz
18GHz～26.5GHz |
±5.0%
±6.0% |
||||
| Connector type | 3.5mm（m） | |||||
| 81702F
Peak power sensor |
Frequency range | 500MHz～40GHz | ||||
| Pulse power range | -20dBm～+20dBm | |||||
| Rise time | ≤10ns | |||||
| Maximum SWR | 500MHz～2GHz
2GHz～18GHz 18GHz～26.5GHz 26.5GHz～40GHz |
1.15
1.26 1.35 1.50 |
||||
| Calibration factor uncertainty | 500MHz～18GHz
18GHz～26.5GHz 26.5GHz～40GHz |
±5.0%
±6.0% ±7.5% |
||||
| Connector type | 2.4mm（m） | |||||
| 81702L
Peak power sensor |
Frequency range | 500MHz～67GHz | ||||
| Pulse power range | -20dBm～+20dBm | |||||
| Rise time | ≤10ns | |||||
| Maximum SWR | 500MHz～2GHz
2GHz～18GHz 18GHz～26.5GHz 26.5GHz～40GHz 40GHz～67GHz |
1.15
1.26 1.35 1.50 1.78 |
||||
| Calibration factor uncertainty | 500MHz～18GHz
18GHz～26.5GHz 26.5GHz～40GHz 40GHz～67GHz |
±5.0%
±6.0% ±7.5% ±8.5% |
||||
| Connector type | 1.85mm（m） | |||||
| 81703D
Peak power sensor |
Frequency range | 50MHz～18GHz | ||||
| Pulse power range | -40dBm～+20dBm | |||||
| Rise time | ≤100ns | |||||
| Maximum SWR | 50MHz～2GHz
2GHz～18GHz |
1.15
1.26 |
||||
| Calibration factor uncertainty | 50MHz～18GHz | ±5.0% | ||||
| Connector type | Type-N（m） | |||||
| 81703E
Peak power sensor |
Frequency range | 500MHz～26.5GHz | ||||
| Pulse power range | -40dBm～+20dBm | |||||
| Rise time | ≤100ns | |||||
| Maximum SWR | 500MHz～2GHz
2GHz～18GHz 18GHz～26.5GHz |
1.15
1.26 1.35 |
||||
| Calibration factor uncertainty | 500MHz～18GHz
18GHz～26.5GHz |
±5.0%
±6.0% |
||||
| Connector type | 3.5mm（m） | |||||
| 81703F
Peak power sensor |
Frequency range | 500MHz～40GHz | ||||
| Pulse power range | -40dBm～+20dBm | |||||
| Rise time | ≤100ns | |||||
| Maximum SWR | 500MHz～2GHz
2GHz～18GHz 18GHz～26.5GHz 26.5GHz～40GHz |
1.15
1.26 1.35 1.50 |
||||
| Calibration factor uncertainty | 500MHz～18GHz
18GHz～26.5GHz 26.5GHz～40GHz |
±5.0%
±6.0% ±7.5% |
||||
| Connector type | 2.4mm（m） | |||||
| 81703L
Peak power sensor |
Frequency range | 500MHz～67GHz | ||||
| Pulse power range | -40dBm～+20dBm | |||||
| Rise time | ≤100ns | |||||
| Maximum SWR | 500MHz～2GHz
2GHz～18GHz 18GHz～26.5GHz 26.5GHz～40GHz 40GHz～67GHz |
1.15
1.26 1.35 1.50 1.78 |
||||
| Calibration factor uncertainty | 500MHz～18GHz
18GHz～26.5GHz 26.5GHz～40GHz 40GHz～67GHz |
±5.0%
±6.0% ±7.5% ±8.5% |
||||
| Connector type | 1.85mm（m） | |||||
Related products
RF & Microwave
Astronics
RF & Microwave
RF & Microwave
RF & Microwave
RF & Microwave