FREEDOM R8000C ::: Communications System Analyzer
FREEDOM R8000C ::: Communications System Analyzer FREEDOM R8000C ::: Communications System Analyzer FREEDOM R8000C ::: Communications System Analyzer FREEDOM R8000C ::: Communications System Analyzer FREEDOM R8000C ::: Communications System Analyzer FREEDOM R8000C ::: Communications System Analyzer

FREEDOM R8000C ::: Communications System Analyzer

0 reviews  0 reviews  >>  Write a review                   
Brand: Freedom
Product Code: R8000C
Availability: In Stock

AM/FM Duplex Monitor and Generator
Audio Synthesizer
Tracking Generator (Opt.)
Dual Display (Opt.)
Cable Fault Locator (Opt.)
Spectrum Analyzer
Frequency Counter
Frequency Error Meter
Digital Voltmeter
Power Meter
Oscilloscope
Signal Strength Meter
SINAD/Distortion Meter

Download Specifications

Download Manual

Download Program Guide

P_10_1

General
Displayed Average Noise:

Level (DANL): -140 dBm (50 Ohm input termination)

Dynamic Range: 80 dB

Input Related Spurious: -60 dBc max

Residual Spurious (non-input related): -70 dBm

MECHANICAL/ENVIRONMENTAL

Weight: <14 lbs (6.4 kg)

Dimensions: 9.4” (23.9 cm) H, 12.7” (32.3 cm) W, 7.5” (19.1 cm) D

Operating Altitude: Up to 10,000 ft (3048 m)

Humidity: 80% maximum relative humidity

Operating Temperature: 0º to 50º C

Storage Temperature: -30º to +80º C

Generator (Receiver Test)

Port Protection Limit: 5W for 30 seconds

Frequency Range: 1MHz to 1GHz (250kHz to 1GHz typical); Optional to 3GHz

Extended Frequency Range (Optional): 1 MHz to 3GHz (250 kHz to 3 GHz typical)

Frequency Resolution: 1Hz

OUTPUT LEVEL GENERATE PORT

Range FM: +5 dBm to -95 dBm below 2 GHz ::: -5 dBm to -95 dBm above 2 GHz

Range AM: -1 dBm to -95 dBm below 2 GHz ::: -11 dBm to -95 dBm above 2 GHz

Resolution: 0.1 dB

Accuracy: ±2 dB

OUTPUT LEVEL RF I/O PORT

Range FM: -30 dBm to -130 dBm below 2 GHz ::: -40 dBm to -130 dBm above 2 GHz

Range AM: -36 dBm to -130 dBm below 2 GHz ::: -46 dBm to -130 dBm above 2 GHz

Resolution: 0.1 dB

Accuracy: ±1dB to 1GHz ; ±2dB > 1GHz

SPECTRAL PURITY

Harmonic Spurious: -20 dBc max

Non-Harmonic Spurious: -35 dBc max

Residual FM: 4Hz, 300 Hz to 3 kHz (<1GHz) ::: 5 Hz, 300 Hz to 3 kHz (> 1 GHz)

Residual AM: 1.0% max, 300 Hz to 3 kHz

SSB Phase Noise (20 kHz Offset): -95 dBc/Hz max below 1 GHz (15° to 35° C) ::: -93 dBc/Hz max all frequencies (0° to 50° C)

FM MODULATION

Deviation Accuracy: 5% of setting

Deviation Range: 0 to 75 kHz

Deviation Resolution: 1 Hz

Pre-emphasis: 750 μs (selectable)

Modulation Bandwidth: 5 Hz to 20 kHz

AM MODULATION

AM Depth Range: 0 to 90%

Deviation Resolution: 1% of setting

Modulation Bandwidth: 100 Hz to 10 kHz

Deviation Accuracy: 5% of setting

Receiver (Transmitter Test)

Frequency Range: 250 kHz – 1 GHz (3 GHz optional)

SENSITIVITY

Narrowband FM: 2.0 uV for 10 dB EIA SINAD

Wideband FM: 10 uV for 10 dB EIA SINAD

AM: 10 uV for 10 dB EIA SINAD

RF I/O PORT

VSWR: < 1.2 to 2 GHz,  1.5 to 3 GHz

Max Power: 50 W for 5 minutes ::: 150 W for 30 seconds (30 sec. on, 5 min. off)

Absolute Max Power: 150 W

Alarm: Internal temperature alarm

ANTENNA PORT

Maximum Power: 0 dBm

Alarm: +10 dBm

IF FILTERS:

6.25 kHz, 12.5 kHz, 25 kHz, 50 kHz, 100 kHz, 200 kHz

FREQUENCY ERROR MEASUREMENT

Type of Display: Autoranging

Resolution: 1 Hz

FM DEVIATION MEASUREMENT

Demodulation Range: Up to ±75 kHz

Accuracy: ±5% plus residual FM

Frequency Response: Selectable per the following:

Low Pass Filters: 300 Hz, 3 kHz, 20 kHz

High Pass Filters: 1 Hz, 300 Hz, 3 kHz

RECEIVE SIGNAL STRENGTH LEVEL METER

Frequency Range: 1MHz to 1GHz (250kHz to 1GHz typical); Optional to 3GHz

Accuracy: ±2 dB

Sensitivity: -120 dBm (Antenna Port; Preamplifier on; 6.25 kHz IF B/W)

BROADBAND POWER METER (RF In/Out Port)

Frequency Range: 1MHz to 1GHz (250kHz to 1GHz typical); Optional to 3GHz

Measurement Range: 0.1Wto150W

Input Impedance: 50 Ohms

Accuracy: ±10% (2 kHz – 1 GHz); ::: ±10% (1 GHz – 3 GHz < 2.5W)

Protection: Over temperature alarms

FREQUENCY COUNTER

Frequency Range: 5 Hz to 100 kHz

Period Counter Range: 5 Hz to 20 kHz

Input Level: 0.1 V rms min

SINAD METER

Accuracy: ±1 dB @ 12 dB SINAD

Input Level: 0.1 V rms min

DISTORTION METER

Range: 1% to 20%

Distortion Accuracy: The greater of: ±0.5% of distortion or ±10% of reading

Input Level: 0.1 V rms min

Spectrum Analyzer

SWEEP

Frequency Range: 1MHz to 1GHz (250kHz to 1GHz typical); Optional to 3GHz

Frequency Resolution: 1 Hz

Span Accuracy: 5%

Update Rate: ~10 times per second (depending on span)

AMPLITUDE

Level Accuracy: ±2 dB

Scales (dB/div): 10 (1,2, & 5 w/ESA option)

Log Linearity Accuracy: <0.1dB

Reference Level Resolution: 1dB

Reference Level Range: +60 to -70 dB

T/R Port Dynamic Range: 80 dB

Typical Noise Floor Performance: -140 dBm

SSB Phase Noise (20 kHz Offset):

-95 dBc/Hz max below 1 GHz (15° to 35° C)

-93 dBc/Hz max all frequencies (0° to 50° C)

Resolution Bandwidth: Auto Selected

Harmonic Spurious (Antenna Port, No Attenuation): -20 dBc max

Non-Harmonic Spurious (Antenna Port, No Attenuation): -60 dBc max

Residual Spurious (Input Terminated): -70 dBm

Markers: Delta, Absolute, and Frequency

Modes: Standard, Average, Freeze, Max Hold, and Peak Hold

Oscilloscope

VERTICAL INPUT

Input Impedance: 1 Meg Ohm / 600 Ohm (Selectable)

Range: ±100 VDC, ±70 Vrms AC

Accuracy: 5% of full scale

Bandwidth: 0 to 50 kHz

HORIZONTAL SWEEP

Range: 20 uSec to 1 Sec / div. (Selectable)

TRIGGER SELECTION: Normal, Auto (Free Running), Single Sweep and Freeze

SPECIAL FUNCTIONS

Markers: Absolute Voltage, Delta Voltage, Del ta Frequency and Delta Period

Audio Modulation Synthesizer

Modulation Types: 1 kHz tone, Private Line, Digital Private Line (w/ DPL Invert), Single Tone, DTMF,Two-Tone
Paging, 5/6 Tone Paging, POCSAG, A&B Independent Synths., EURO Tones, User Defined
Tone Sequences, and External inputs from both a supplied micro-phone and BNC input.

Modulation Ouput Level: Programmable to ±8 V peak

Amplitude Flatness: ±0.2 dB (300 Hz to 3 kHz), 1 dB point @ 20 kHz

1 kHz Tone Distortion: Not to exceed 1% THD

Impedance: 100 Ohms

External Modulation Input Level: ±1 V peak reference

Amplitude Flatness: ±0.2 dB (300 Hz to 3 kHz), 1 dB point @ 20 kHz

Impedance: 600 Ohms

External Microphone Input Amplitude Flatness: ±0.2 dB (300 Hz to 3 kHz), 1 dB point @ 20 kHz

Tracking Generator

Frequency Range: 1MHz to 1GHz (250kHz to 1GHz typical); Optional to 3GHz

Digital Voltmeter (DVM)

Input Impedance: 1 Meg Ohm / 600 Ohm (Selectable)

Voltage Range: 1V, 10V, 70V full scale

Frequency Range: 50 Hz to 20 kHz

DC Accuracy: 1% full scale ±1 LSB

AC Accuracy: 5% full scale ±1 LSB

Timebase

Output Frequency: 10 MHz

Stability: Aging: ±0.1 ppm / year ::: Temp.: ±0.01 ppm

Output Level: Minimum 0 dBm into 50 Ohms

Warm Up: 3 minutes: within ±0.1 ppm

Display

FRONT PANEL DISPLAY

Resolution: 800 x 600

Size: 8.4” (21.3 cm) Full Color LCD

EXTERNAL DISPLAY

External Display: VGA

Remote Interface (Optional Feature)

Remote Front Pane: Available over Ethernet

 

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



  • Rigol
  • Fiber Fox
  • Anritsu
  • Freedom
  • Keysight Nemo
  • Triorail
  • ShinewayTech
  • Grandway
  • MCP Lab Electronics
  • LeCroy
  • All-Test Pro
  • Chauvin Arnoux
  • MultiWave
  • Guide
  • Ideal
  • Actix
  • Laboratory Accreditation Bureau L-A-B
Coral-i Solutions © 2018
Sales - Rentals - Training - Repair - Calibration